Installation; Installation Warnings - Rivacold Best W R290 Bedienungsanleitung

5. Installation

This section includes the following topics:
5.1 Installation warnings
5.2 Setting the packaged unit in place
5.3 Installation requirements
5.4 Install the BEST WS (saddle)
5.5 Install the BEST W (with plug-in insulating panel)
5.6 Install the BEST WT (with the pre-fitted plug-in insulating panel)
5.7 Secure the door switch
5.8 Connect the packaged unit to the electrical mains
5.9 Work area and operational tasks

5.1 Installation warnings

5.1.1 Preamble
Always refer to the information provided when ordering the packaged unit. Contact Rivacold technical
assistance to receive specific information for the installation.
5.1.2 Required skills
Manufacturer's personnel
COMPANY
Mechanical maintenance engineer
Driver
5.1.3 Safety
DANGER! Explosion/Burn. Presence of flammable gas. The place of installation must have good air
circulation and must be far from heat sources, such as naked flames or hot surfaces and from
electrical components or flammable materials. During installation, adopt all the precautions
required by legislation in force.
Crushing. Always use lifting equipment and accessories of adequate capacity for the load to be
lifted and follow the lifting warnings given in this instruction manual.
Falling from above. Always use adequate means and accessories. Provide safe access to the
installation area. Follow the warnings given in this instruction manual.
Electrocution. Always use adequate means and accessories. Follow the warnings given in this
instruction manual.
Instruction manual v. 00 | 9600-0033
Rev.
BEST W R290
© 2020 RIVACOLD srl
|
EN
99
100
101
101
103
106
107
108
108
99