4. Transport and handling
This section includes the following topics:
4.1 Handling warnings
4.2 Transport and handling
4.1 Handling warnings
4.1.1 Required skills
Driver
4.1.2 Safety
DANGER!
Explosion/Burn. Presence of flammable gas. During transport and handling, adopt all the
precautions required by the legislation in force.
WARNING! Crushing. Always use lifting equipment and accessories of adequate capacity for the
load to be lifted. Use the personal protective equipment. Follow the warnings given in this
instruction manual concerning lifting.
NOTICE: there is oil in the machine. Always handle in an upright position.
4.1.3 Choosing lifting equipment and accessories
The following general indications apply to load lifting operations and also concern the use of lifting
accessories not supplied with the packaged unit. Choose lifting equipment and accessories according to the
dimensions, weight and shape of the load to be lifted.
4.1.4 Preliminary checks
Check that the lifting accessories are intact.
l
Check that there are no people or objects in the maneuvering area.
l
Check the stability and correct balancing of the load by slowly lifting it slightly.
l
4.1.5 General warnings
Due to the presence of oil in the compressor, move the packaged unit while still maintaining the upright
l
position. NEVER overturn the packaged unit.
Choose the harnessing points so that the load is balanced correctly, considering its center of gravity.
l
Monitor the lifting movement from a safe distance. NEVER stand under the load.
l
Only guide the load with ropes and hooks.
l
If you need to accompany the load with your hands, pull the load. DO NOT push it.
l
Lift the load continuously, without jerking or sudden movements.
l
After placing the load on the ground, slacken the tension on the tie rods before removing the lifting
l
accessories.
Note: the center of gravity is indicated on the packaged unit packaging.
Instruction manual
v. 00 | 9600-0033
Rev.
BEST W R290
© 2020 RIVACOLD srl
|
EN
97
98
97