Rivacold BEST W R290 Bedienungsanleitung Seite 103

EN
5. Installation
5.4.3 Procedure
1. Make the grooves [A] and a hole [B] in the wall to
drain water, using the packaging template.
3. Lift the packaged unit using the eyebolts [E].
5. Secure the packaged unit to the wall by inserting
the screws in the holes [G].
102
BEST W R290
2. Undo the screws of the tray [C] and remove it
from the evaporating part [D].
4. Set the packaged unit in place, inserting the
brackets [F] into the grooves [A] of the wall.
6. Seal the grooves in contact with the packaged
unit and the brackets with silicone.
Instruction manual
Rev.
v. 00 | 9600-0033 © 2020 RIVACOLD srl
|