Corrective Maintenance; Remove The Front Panel - Rivacold Best W R290 Bedienungsanleitung

EN
7. Maintenance

7.4 Corrective maintenance

7.4.1 Required skills
Mechanical maintenance engineer
Electrical maintenance engineer
7.4.2 Safety
If in doubt, before carrying out any operation, contact RIVACOLD srl.
7.4.3 What to do
In case of damage or a malfunction, consult "Installation and operation troubleshooting" on page 129or
Rivacold srl

7.5 Remove the front panel

7.5.1 Required skills
Mechanical maintenance engineer
7.5.2 Procedure
1. Access the electrical box [A] by removing the right
side panel [B] and the electrical box panel [C].
122
BEST W R290
Always wear helmets, footwear and protective gloves.
Always wear the mask and protective goggles.
2. On both sides, undo the screws [B] and slightly
rotate the bracket [C].
Instruction manual v. 00 | 9600-0033 © 2020 RIVACOLD srl
Rev. |