Secure The Door Switch - Rivacold Best W R290 Bedienungsanleitung

3. Insert the evaporating part [C] and recess the
plug-in insulating panel [D] in the window [A] of
the wall.
5. Seal the parts of the packaged unit in contact with
the window with silicone.
8. Connect electricity and turn on (see "Control panel
operations" on page 112).

5.7 Secure the door switch

5.7.1 Safety
CAUTION!: to avoid signal interference, the door switch cable must pass far away from the electric
current cables.
Instruction manual v. 00 | 9600-0033
Rev.
BEST W R290
4. Secure the packaged unit with the screws [E].
6. Connect the overflow tube to drain the
7. Install the door switch (see "Secure the door
© 2020 RIVACOLD srl
|
condensate.
switch" below).
EN
5. Installation
107