Install The Best Wt (With The Pre-Fitted Plug-In Insulating Panel) - Rivacold Best W R290 Bedienungsanleitung

EN
5. Installation

5.6 Install the BEST WT (with the pre-fitted plug-in insulating panel)

5.6.1 Result
5.6.2 Dimensions of the window to be made in the wall
For this type of installation, depending on the dimensions of the packaged unit, a window with the following
dimensions in centimeters (cm) must be made in the coldroom wall chosen for installation:
BEWT25 Codes
5.6.3 Procedure
1. On the wall of the refrigeration coldroom, make a
window [A] using the template in the packaging.
106
BEST W R290
BEWT30 Codes
2. Lift the packaged unit using the eyebolts [B].
Instruction manual
BEWT35 Codes
v. 00 | 9600-0033 © 2020 RIVACOLD srl
Rev. |