Setting The Date And Time - Rivacold Best W R290 Bedienungsanleitung

6.3 Setting the date and time

6.3.1 Access the parameters menu
To access the parameters menu, see Enter the password.
6.3.2 Changing the date and time
StG > rtC
Step Button
From the RTCparameter display, press
1
SET.
TZ appears alternating with a digit
indicating the time zone currently set.
2
Press DOWNto skip.
Press SET to change the time zone.
The value of the current time zone set
appears fixed.
3
Press UP/DOWN to select the desired
value.
Press SET to confirm and switch to the
next value.
The letter d (day) appears, followed by two
digits indicating the number of the day.
4
Press UP/DOWN to set the day.
Press SET to confirm and switch to the
next value.
The letter m (month) appears, followed by
two digits indicating the number of the
month.
5
Press UP/DOWN to set the month.
Press SET to confirm and switch to the
next value.
The letter y (year) appears, followed by
two digits indicating the number of the
year.
6
Press UP/DOWN to set the year.
Press SET to confirm and switch to the
next value.
The letter h (hour) appears, followed by
two digits indicating the time.
7
Press UP/DOWN to set the time.
Press SET to confirm and switch to the
next value.
Instruction manual v. 00 | 9600-0033
Rev.
Action
Note: See "Time zones table" on page 149.
© 2020 RIVACOLD srl
|
BEST W R290 6. Start-up
Result
113
EN