Appendix; Decommissioning; Technical Features - Rivacold Best W R290 Bedienungsanleitung

EN

9. Appendix

This section includes the following topics:

9.1 Decommissioning

9.2 Technical features

9.3 Attachments
9.4 Time zones
9.1 Decommissioning
9.1.1 Required skills
Mechanical maintenance engineer
Electrical maintenance engineer
Driver
9.1.2 Safety
DANGER! Explosion/Burn. Presence of flammable gas. During installation, adopt all the
precautions required by legislation in force.
Crushing. Always use lifting equipment and accessories of adequate capacity for the load to be
lifted and follow the lifting warnings given in this instruction manual.
Falling from above. Always use adequate means and accessories. Provide safe access to the
installation area. Follow the warnings given in this instruction manual.
Electrocution. Always use adequate means and accessories. Follow the warnings given in this
instruction manual.
Cut or abrasion. Wear the personal protective equipment.
9.1.3 Warnings
Environmental contamination. Follow the regulations in force regarding the disposal of polluting materials.
9.1.4 Dismantling the machine
If the machine is to be relocated or has reached the end of its technical and operational life cycle, it must be
dismantled. Dismantling procedure
1. Disconnect the energy sources.
2. Disassemble the various components.
144
BEST W R290
Always wear protective goggles, footwear, protective gloves and tight-
fitting clothes.
Instruction manual v. 00 | 9600-0033 © 2020 RIVACOLD srl
Rev. |
144
146
149
149