Electrical Connection - Balluff BTL7-Serie Betriebsanleitung

BTL7-A/C/E/G_ _ _-M_ _ _ _-A/B/Y/Z(8)-S32/S115/S135/S140/KA_ _/FA_ _
Micropulse Transducer - Rod Style
4
Installation and connection (continued)
Supporting rod made of non-magnetizable material
Fig. 4-8: Example 2, transducer installed with supporting rod
4.4.1 Connector type S32/cable connection
S32 Cable -A_10
Pin color
1 YE yellow Not used
2 GY gray
3 PK pink 10 to 0 V
4 RD red
5 GN green 0 to 10 V
8 WH white
6 BU blue
7 BN brown
1) Unassigned leads can be connected to the GND on the controller side but not to the shield.
2)
Reference potential for supply voltage and EMC-GND.
Tab. 4-2: Connection assignment BTL7...-S32
4.4.2 Connector type S115
S115 -A_10 -G_10
Pin
1
2
3 10 to 0 V 10 to 10 V
4
5 0 to 10 V 10 to 10 V
8
BTL7-_1_ _-...
6 GND
7 20 to 28 V
1)
Unassigned leads can be connected to the GND on the controller side but not to the shield.
2) Reference potential for supply voltage and EMC-GND.
Tab. 4-3: Connection assignment BTL7...-S115
www.balluff.com
All manuals and user guides at all-guides.com
Magnet
(e.g. BTL-P-1028-15R)
-G_10 -C_00 -C_70
1)
0 to 20 mA 20 to 0 mA 4 to 20 mA 20 to 4 mA
0 V
10 to 10 V
La (programming input)
10 to 10 V
Lb (programming input)
BTL7-_1_ _-...
2)
GND
20 to 28 V
-C_00 -C_70
0 V (pin 3)
0 V (pin 5)
Not used
La (programming input)
0 to 20 mA 20 to 0 mA
Lb (programming input)
2)
4.4

Electrical connection

Depending on the model, the electrical connection is made
using a cable or a connector.
The connection or pin assignments for the respective
version can be found in Tab. 4-2 to Tab. 4-5.
Note the information on shielding and cable
routing on page 13.
-E_00 -E_70
Not used 1)
Not used 1)
BTL7-_5_ _-...
2)
GND
10 to 30 V
-E_00 -E_70
1)
4 to 20 mA 20 to 4 mA
BTL7-_5_ _-...
GND 2)
10 to 30 V
Fig. 4-9: Pin assignment of
S32 (view of
connector pins of
transducer), 8-pin
M16 circular plug
Fig. 4-10: Pin assignment of
S115 (view of connec-
tor pins of transdu-
cer), 8-pin M12
circular plug
english
11