Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BTL7-A/C/E/G_ _ _-M_ _ _ _-A/B/Y/Z(8)-S32/S115/S135/S140/KA_ _/FA_ _
Micropulse Transducer - Rod Style
8
Calibration using adjustment
NOTICE!
Interference in function
Adjustment while the system is running may result in
malfunctions.
Stop the system before performing adjustment.
Initial situation:
–
Transducer with magnet within measuring range
1. Activate buttons
Hold down any button for at least 3 s.
Release button.
Within 1 s, hold down
least 3 s.
Output indicates error value.
Buttons are activated.
If an error or an interruption occurs while
activating the buttons, allow a wait time of 12 s
before retrying.
2. Select adjustment
Hold down
for at least 2 s.
Indication for "Adjustment" is displayed.
Release
.
Current position value is displayed.
3. Adjust start value
Bring magnet to start position.
Hold down
for at least 2 s.
Indication for "Adjust start value" is displayed.
Adjust start value.
The start value can be changed using
The gradient of the output remains constant
(see page 16).
Exit calibration procedure: Press
more than 2 s.
Indication for "Adjustment" is displayed.
Set position value is saved.
1) Briefly press button: Current value is increased or
decreased by approx. 1 mV or 1 A.
If a button is held down longer than 1 s, the step
interval is increased.
www.balluff.com
All manuals and user guides at all-guides.com
and
simultaneously for at
1
1)
and
.
2
and
for no
LED legend:
LED display
LED1 LED2 At 0 to 10 V
1
2
> 3 s
< 1 s
1
2
> 3 s
2
> 2 s
1
> 2 s
1
2
< 2 s
1
2
Adjust end value
(see page 20)
LED not on
LED green
LED 1 and LED 2 flashing green-red in alternation
LED flashing green
LED 1 and LED 2 flashing red-red in alternation
Displayed values (example)
At 4 to 20 mA
5.39 V
9.15 mA
5.39 V
9.15 mA
10.50 V
3.60 mA
2.00 V
6.00 mA
5.39 V
9.15 mA
1.04 V
4.82 mA
0.00 V
4.00 mA
1.04 V
4.82 mA
1.00 V
4.40 mA
2.00 V
6.00 mA
1.00 V
4.40 mA
english
19
Werbung
Inhaltsverzeichnis
