Switching The E-Bike Battery On And Off; 5.7 Parking The E-Bike Or Going For A Ride - Urban Arrow Shorty Gebrauchsanweisung

Image 21: Switching the display on and off

5.6.4 Switching the e-bike battery on and off

Switching on the e-bike battery is done as follows:
1. Press the on/off button 53 of the battery 54 .
The LEDs of indicator 52 light up and at the same time
indicate the charge condition.
Switching off the battery is done as follows:
1. Press the on/off button 53 of the battery 54 .
The LEDs of indicator 52 go out. This also switches off the
e-bike.
2
If the capacity of the e-bike battery is below 5%, no LED on
the charge-control indicator 52 lights up. It is only visible on
the display, if the e-bike is switched on.
32 Urban Arrow Shorty
All manuals and user guides at all-guides.com
2
If no power is drawn from the e-bike drive for about 10
minutes (e.g. because the e-bike is not moving) and no button
is pressed on the display or the control unit of the e-bike, the
e-bike and therefore also the e-bike battery will shut down
automatically to save energy.
Parking the e-bike or going for a ride
5.7
When you want to park the bike, put it on the kickstand. Putting the
bike on the kickstand is done as follows:
1. Dismount the e-bike.
2. Take position on one side of the e-bike.
3. Hold the grips 110 - one hand on each grip (see step 1 in
image 22) - and push down the end of the kickstand 13 with
your foot (see step 2 in image 22). Simultaneously pull the
bike backwards with one hand on each grip (see step 3 in
image 22).
1
Never park your bike with the front pointing down a slope
(even small ones). The kickstand could be overcome by the
weight of the bike alone or a small push and cause your bike
to fall over.
1
Never pull the bike backwards to get it off the kickstand. This
will make the kickstand move in the wrong direction which
can damage the kickstand mechanism.