Switching The E-Bike On And Off - Urban Arrow Shorty Gebrauchsanweisung

4. Tilt the battery out of the top part of the battery holder 59.
5. Pull the battery out of the bottom part of the battery holder
51.
Mind that the key of the battery lock is also used to
Tip
unlock the bike lock. We advise you to never leave it behind in
the battery lock to prevent theft of the e-bike.
Image 20: Unlocking the e-bike
2
Always take your battery out of the frame when you are
parking it for longer periods or in high risk areas. It is an
expensive part to replace and there is always a chance it will
be stolen.

5.6.3 Switching the e-bike on and off

There are multiple ways to switch on the e-bike:
1. When the display is not yet inserted into the holder (in case of
an Intuvia display):
a. Switch on the display and place it into the holder. The
e-bike will automatically switch on.
User manual
All manuals and user guides at all-guides.com
2
2
There are multiple ways to switch off the e-bike off:
2
2
b. Insert the display into the holder. Switch on the display.
2. When the display is already inserted in the holder:
a. Switch on the e-bike battery (see paragraph 5.6.3).
b. Switch on the display (see image 21).
This is under the condition that a charged e-bike battery
is inserted in the battery cradle and the speed sensor is
properly connected.
When the e-bike is switched on correctly the text 'm/h' or
'km/h' will appear on the screen of both the Intuvia and
Purion display.
● Switch off the display (see image 21).
● Switch off the e-bike battery (see paragraph 5.6.3).
● Remove the display out of its holder (in case of an Intuvia
display) (see paragraph 5.6.1).
If no power is drawn from the e-bike for about 10 minutes
(e.g. because the e-bike is not moving) and no button is
pressed on the display for 10 minutes, the e-bike and
therefore also the e-bike battery will shut down automatically
to save energy.
The e-bike can also be ridden as a normal bicycle without
assistance at any time by switching off the e-bike. Be aware
that the lights are not functioning when the e-bike is switched
off. Put the assistance level on OFF if you want to drive
without any assistance but want your lights to function.
EN
31