Power Supply Of External Devices Via Usb Connection - Urban Arrow Shorty Gebrauchsanweisung

2. Press the light button 72 to switch on the lights. The text
'Lights on' will appear on the display for approximately 1
second. The lighting symbol 70 is displayed on the display
when the light is on.
2
Switching the bike light on and off has no effect on the back
lighting of the display.
2
Contact your Urban Arrow dealer in case the front and rear
light don't turn on simultaneously or don't turn on at all.
There are multiple ways to turn off the lights when you have an
Intuvia display. Turning off the lights with the Intuvia display is done
as follows:
● Press the on/off button 83 on the display. The lighting symbol
70 will disappear from the display.
● Turn off the e-bike (see paragraph 5.6.3).
● Remove the display from the e-bike (see paragraph 5.6.1).
Turning on the lights with the Purion display is done as follows:
1. Press on/off button 113 to turn on the e-bike (see paragraph
5.6.3 for the requirements).
2. Press the + button 94 between 1 and 2.5 seconds to switch on
the lights. The lighting symbol 107 is displayed on the display
when the light is on.
2
Switching the bike light on and off has no effect on the back
lighting of the display.
36 Urban Arrow Shorty
All manuals and user guides at all-guides.com
2
Contact your Urban Arrow dealer in case the front and rear
light don't turn on simultaneously or don't turn on at all.
Turning off the lights with the Purion display is done as follows:
1. Press the + button 94 longer than 2.5 seconds to switch on
the lights. The lighting symbol 107 will disappear from the
display.
5.9 Power supply of external devices via USB connection of the
Intuvia display
With the USB connection on the Intuvia it is possible to operate and
charge most devices whose power supply is possible via USB (e.g.
various mobile phones).
2
The USB connection on the Purion display is only for service
purposes.
Supplying your external device with power via the display is done as
follows:
1. In case you have an Intuvia display: Place the display in the
display holder 41. See paragraph 5.6.1 for instructions.
2. Place a charged battery in the battery holder. See paragraph
5.6.2 for instructions.
3. Open the USB port protective cap 67.
4. Connect the USB connection of the external device to the
USB port 66. Use the USB charging cable Micro A – Micro B
(available from your Urban Arrow e-bike dealer).