Resetting Display Functions With A Purion Display Resetting Error Code Indications - Urban Arrow Shorty Gebrauchsanweisung

Resetting the value of maximum speed to zero is done as follows:
1. Press i button 71 on the display or i button 87 on the control
unit repeatedly until the function 'max. speed' is displayed.
2. Press and hold the reset button 84 until the indication is set
to zero.
Resetting the value of range to the factory setting is done as follows:
1. Press i button 71 on the display or i button 87 on the control
unit repeatedly until the function 'range' is displayed.
2. Press and hold the reset button 84 until the indication is set
to the value of the factory setting.
6.4.2 Resetting display functions with a Purion display
With the Purion display the trip distance and range of the battery
can be reset.
Resetting the value of trip distance to zero is done as follows:
1. Press the - button 93 between 1 and 2.5 seconds until the
desired assistance level TRIP appears on the indicator 96.
2. Press and hold the - button 93 and + button 94
simultaneously over 2.5 seconds. The text 'reset' will initially
appear. The trip distance value is set to zero.
Resetting the range of the battery to zero is done as follows:
1. Press the - button 93 between 1 and 2.5 seconds until the
desired assistance level RANGE appears on the indicator 98.
2. Press and hold the - button 93 and + button 94
simultaneously over 2.5 seconds. The text 'reset' will initially
appear. The range of the battery is set to zero.
User manual
All manuals and user guides at all-guides.com
6.5
The components of the e-bike are continuously and automatically
monitored. If an error is detected, the corresponding error code will
appear on the text indicator 74 of the Intuvia display and 103 of the
Purion display.
2
Resetting error code indications on the display is done as follows:
Resetting error code indications
Depending on the type of error, the electrical drive unit may
automatically shut down. In this case cycling is possible, but
there will be no pedalling assistance while functioning in this
error mode. Take your e-bike to your Urban Arrow dealer to
have it repaired as soon as possible.
1. Press any button on the Intuvia display 38 or the Purion
display 111 to return to the standard indication.
Depending on the error code the indication will appear on the
display again after the e-bike has been switched off and on.
EN
41