Switching The Push Assistandce Mode On Andd Off With And Intuvia Display; 24 6.3.2 Switching The Push Assistance Mode On And Off With A Purion Display; 25 6.4 Resetting Display Functions; Resetting Display Functions With An Intuvia Display - Urban Arrow Shorty Gebrauchsanweisung

6.3.1 Switching the push assistance mode on and off with an
Intuvia display
Switching on the push assistance when you have an Intuvia display
is done as follows:
1. Press and hold walk button 89 on the control unit. The
electrical drive unit is switched on.
2
The push assistance cannot be activated in the OFF
assistance level.
There are multiple situations in which the push assistance of the
Intuvia display switches off:
1. When you release the walk button 89.
2. In case the wheels of the e-bike are blocked (e.g. by applying
the brakes or hitting an obstacle).
3. When the speed of your e-bike exceeds 6 km/h.
6.3.2 Switching the push assistance mode on and off with a Purion
display
Switching on the push assistance when you have an Purion display
is done as follows:
1. Press the walk button 105 on the display for less than 1
second. The push assistance is activated.
2. Press and hold the + button 94 within 3 seconds after
activation. The electrical drive unit is switched on.
2
The push assistance cannot be activated in the OFF
assistance level.
40 Urban Arrow Shorty
All manuals and user guides at all-guides.com
There are multiple situations in which the push assistance of the
Purion display switches off:
1. When you release the + button 94.
2. In case the wheels of the e-bike are blocked (e.g. by applying
the brakes or hitting an obstacle).
3. When the speed of your e-bike exceeds 6 km/h.
6.4 Resetting display functions
In this paragraph we explain how to reset a number of display
functions depending on the type of display on your bike.

6.4.1 Resetting display functions with an Intuvia display

With the Intuvia display the following values can be reset: trip
distance, trip time, average speed, maximum speed and range.
Resetting the values of trip distance, trip time and average speed to
zero on a is done as follows:
1. Press i button 71 on the display or i button 87 on the control
unit repeatedly until one of the functions 'trip time', 'trip
distance' or 'avg.speed' is displayed.
2. Press and hold the reset button 84 until the indication is set
to zero.
This also resets the values of the other two functions.