Herunterladen Inhalt Inhalt Diese Seite drucken

Inserting, Removing, Securing And Charging The Intuvia Display - Urban Arrow Shorty Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Shorty:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

● A charged e-bike battery is inserted into the battery cradle
● The speed sensor is connected properly
2
There is no specifi c order in mounting the display and the
battery.
In the following paragraphs we will explain you how to:
● Insert, remove, secure and charge the Intuvia display
● Place and remove the e-bike battery from the battery cradle
● Switch the e-bike on and off
2
In case the speed sensor is not connected properly, the text
'Error 503' will appear on the screen of your display. Cycling
remains possible but there will be no pedalling assistance as
the electrical drive unit will be turned off automatically while
functioning in this error mode. Check paragraph 8.2 for more
information on how to check the speed sensor.
5.6.1 Inserting, removing, securing and charging the Intuvia
display
Inserting the Intuvia display is done as follows:
1. Slide the display from the front into the holder 41 mounted on
the handlebar 80 .
Removing the Intuvia display from your bike is done as follows:
1. Press and hold the locking latch 39 and slide the display
toward the front out of the holder 41 (see image 16).
28
Urban Arrow Shorty
All manuals and user guides at all-guides.com
2
When the display is removed the last indicated assistance
level at 69 is stored; the motor-output indicator 68 remains
empty and the last displayed battery charge level 65 is saved.
Image 16: Removing the display
Securing the Intuvia display against removal is done as follows:
2
You need an 3mm Allen key and a M3 screw (8mm long)
1. Unscrew the display holder bolts 43 .
2. Remove the holder from the handlebar by taking the top 41
and bottom part 42 of the display holder apart.
3. Slide the display into the top part of display holder.
4. Screw the locking screw into the thread at 40 provided in the
top part of display holder.
5. Mount the holder back onto the handlebar.
There are two ways to supply energy to the display:
1. Energy supply by the battery of the e-bike:
If the display is in the holder 41 , a suffi ciently charged battery

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis