Wellsystem RELAX Gebrauchsanweisung Seite 75

05/2012 1011952-00
All manuals and user guides at all-guides.com
Activating and interrupting the massage times
Operating
button
START / STOP button
Massage time display
Massage time display
Program interruption
Massage time display
Only possible if the pause function (13) has been activated while in pre-
1
setting mode
Basic settings / Remarks
Display
Massage start:
Press the START / STOP button.
The device switches on.
Massage time sequence:
The display counts down in seconds,
e.g. from 30.00 down to 0.00.
Massage time finish:
The nozzle carriage moves down to
the feet end and then up to the head
end.
The display will change from 0.00 to
STOP.
A new massage session can now be
called up.
Massage start:
Press the START / STOP button.
The device switches on again.
Massage stop:
Press the START / STOP button and
keep it held down for approx. 3 s. The
device switches off.
The display will start to flash.
A new massage session can now be
called up.
Massage start:
Press the START / STOP button.
The device switches on again.
Program interruption
Press the START / STOP button and
hold down for approx. 1 s.
Note:
The massage time will keep running.
The nozzle carriage moves in the
direction of the foot end or head end.
It remains in this waiting position until
the START / STOP button is pressed
again.
Continue program:
Press the START / STOP button.
The nozzle carriage moves back into
the position for the preset program.
Operation
1
Operating instructions – 27/44