Assembly; Installation Site - Wellsystem RELAX Gebrauchsanweisung

05/2012 1011952-00
All manuals and user guides at all-guides.com
2.6.1
Information regarding the disassembly and assembly of the device is availa-
ble in the separate assembly instructions. These assembly instructions are
intended solely for use by the manufacturer's service personnel or by qualified
specialists authorized by the manufacturer.
2.6.2
Environmental conditions
Optimum ambient temperature: Between 20 °C and 35 °C

Storage temperature: Between -15 °C and +60 °C (the well, pump and

the hoses must not contain any water)
Relative humidity: Between 30 % and 75 %

Air pressure: Between 700 hPa and 1060 hPa

Water and cooling conditions
Permissible water pressure (water inlet): 8 bar

Maximum coolant temperature: 16 °C


Assembly

DANGER!
Personal danger due to electric shock or burns!
– The assembly and electrical connection must comply
with the national regulations.
– Assembly, installation, upgrading or servicing of the
device may only be carried out by personnel specially
trained and authorized by JK-Global Service.

Installation site

WARNING!
Overheating from inadequate cooling!
The device might be damaged!
– Maintain the minimum distances from the walls! Dimen-
sions are given on page 35.
– Do not change, obstruct or block the air inflow and
outflow to the device or make any unauthorized chang-
es to the device.
NOTE:
Due to vibrations, use of the device e.g. on ships, oil plat-
forms and in hospital trains is not directly authorized. In such
cases, please contact the customer service department
immediately – see page 2.
Information for the operator
Operating instructions – 9/44