Presettings - Wellsystem RELAX Gebrauchsanweisung

Presettings

7 Presettings
No. Description
Total operating hours
(Reset: Press the plus and minus keys simultaneously)
Operating hours since the last service
(Reset: Press the plus and minus keys simultaneously)
Water temperature unit
The change from °C to °F and back is done by conversion; the
actual temperature may vary slightly.
Time controller
(FREE = freely selectable massage time, SEAL = default time
setting, COIN = coin operation)
Maximum massage time in minutes (when Setting 04 = FREE)
Default massage time / chip card program time in minutes
(when Setting 04 = SEAL)
Water default temperature setting in °C
Water default temperature setting in °F
Actual water temperature in °C or °F
Normal operation = FREE – see 'Expanding the chip card
functions'; chip card-dependent operation = PAY
Chip card upgrading – see 'Expanding the chip card functions'
(number of massages)
Reset the device default status (i.e. delivery status) by pressing
the plus and minus buttons simultaneously and holding them
down.
36/44
All manuals and user guides at all-guides.com
Operating states can be called up and presettings entered in service / preset
mode.
See page 20.
– Insert service card.
– The code for the last function setting is displayed on the screen e.g. 06
and SER alternating.
– Press the massage pressure button to display the current setting for this
function, e.g. 10.00.
– Press the plus or minus button (4) to modify the setting.
– Press the massage pressure button (12) to confirm the setting. 06 will be
displayed on the screen again.
– Press the plus button (4) to scroll up to the next function.
– Press the minus button (4) to scroll down to the next function.
On delivery Values from - to
0 0 - 9999
0 0 - 9999
°C °F, °C
FREE FREE, SEAL, COIN
30 5 - 45
30 5 - 45
35 20 - 40
95 68 - 104
– –
FREE FREE, PAY
20 1 - 50
– RSET