Starting The Massage; Starting With A Chip Card - Wellsystem RELAX Gebrauchsanweisung

05/2012 1011952-00
All manuals and user guides at all-guides.com
4.3
– Setting the massage time – see page 28.
– Lie down on the unit. In doing so place your head on the positioned head-
rest.
– Select the massage area that you want and then press the START /
STOP button.
4.3.1
3 chip cards each loaded with a massage program are available as an acces-
sory – see page 23.

Starting the massage

NOTE:
If and how the massage time can be selected depends on
the presettings – see page 36.
NOTE:
The zone or point massage selection only functions when
the nozzles are moving from the head end to the foot end.
If you have missed the right moment:

First select whole body massage again.

Wait until the nozzles reach the desired position while
moving from the head end.

Press zone or point massage.
NOTE:
The cooler in the base of the device is switched on and off
automatically whilst the device is being used.

Starting with a chip card

NOTE:
If and how the massage time can be selected depends on
the presettings – see page 36.
NOTE:
Any massage time setting can be entered prior to starting
when using a chip card (up to the maximum default time
permitted). The massaging pressure can be decreased or
increased at any time whilst the unit is working.
The type of massage cannot be changed!
Operation
Operating instructions – 21/44