Venting - Wellsystem RELAX Gebrauchsanweisung

05/2012 1011952-00
All manuals and user guides at all-guides.com
5.5.2
The tank must be vented 3 days after commissioning or after it has been
initially filled. After this, venting is unnecessary unless leakages occur and the
tank has to be topped up.
– Open the valve.
– Press the rubber blanket down gently, so that the air escapes.
– Shut the valve again afterwards.
WARNING!
The device might be damaged by moisture!
– The device may no longer be used in the event of water
loss (puddles on the floor). Please inform our customer
service department – see page 2.
– Do not switch the device on if there are leaks or if it is
damaged. Inform our customer service department –
see page 2.

Venting

DANGER!
Illnesses can be caused by contaminated water!
The water in the tank is untreated and can be contaminated
with bacteria.
– Wear protective gloves if you are likely to come into
contact with the water.
Cleaning and maintenance
Operating instructions – 33/44