Variable Settings - Wellsystem RELAX Gebrauchsanweisung

Operation
28/44
All manuals and user guides at all-guides.com
4.8.2

Variable settings

Massage area, massage time and massage pressure settings
Operating Settings /
button Display
Altering the
massage time,
e.g. from
START / STOP button
Massage time display
Altering the
massage pressure,
e.g. from
Remarks
Before starting:
Press the massage time button and
hold down for approx. 1 s. The display
will flash. Press the plus or minus
buttons to set up the value that you
to
want.
Basic setting:
Changes can only be made using the
service card in the default settings
mode
Factory setting: 30 minutes
Minimum and maximum massage
times in minutes:
5.00 to 45.00 in minutes
The device switches on
After starting:
Select massage area, e.g.:
Lower body button
Factory setting: Whole body massage
Press the massage pressure button
and hold down for approx. 1 s. The
display will flash. Press the plus or
minus buttons to set up the value that
you want.
to
Basic setting:
Changes can only be made using the
service card in the default settings
mode
Factory setting: 1.50
Minimum and maximum massage
pressure:
0.5 to 3.75 in 0.25 intervals