Faults; Cleaning And Disinfection; Cleaning The Surfaces - Wellsystem RELAX Gebrauchsanweisung

05/2012 1011952-00
All manuals and user guides at all-guides.com
5.2
Error codes are output to the display to simplify troubleshooting:
If an error occurs, the error code flashes on the display.

If several errors occur, the error messages are displayed alternately.

Inform our customer service department if the same error code is dis-

played again after pressing the START / STOP button or switching the
device back on – see page 2.
More detailed information regarding the error description and solutions can be
found in 'Fehlercodes/Error Codes', (order no. 801290-..).
5.3
5.3.1

Faults

NOTE:
Certain error messages can be switched off by pressing the
START / STOP button.
In other cases the error can be eliminated by switching the
device off for 1 minute (switch off using the main switch / the
fuse).

Cleaning and disinfection

DANGER!
Infections can be spread by skin contact!
All objects / device parts touched by the user during use
must be disinfected after every use:
– Handle
– Control panel
– Rubber blanket
– Frame
– Headrest
NOTE:
Adhere to the stipulated times to ensure thorough disinfec-
tion. Follow the manufacturer's instructions for use.

Cleaning the surfaces

WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply voids any warranty claims.
– For the fast, hygienic and proper cleaning of surfaces,
use specially developed cleaning agents.
– Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
never be used for cleaning.
Cleaning and maintenance
Operating instructions – 31/44