Specifications - WIKA CPG1000 Betriebsanleitung

3. Specifications

3. Specifications
GB
Specifications
Pressure range
Over-pressure safety
Burst pressure
Resolution
Pressure range
Over-pressure safety
Burst pressure
Resolution
Pressure range
Over-pressure safety
Burst pressure
Resolution
Pressure range
Over-pressure safety
Burst pressure
Resolution
Measurement uncertainty
Relative pressure
■
Vacuum measuring ranges % / FS
■
Types of pressure
Pressure connection
Pressure medium
3)
Data logger
Material
Wetted parts
■
Housing
■
1) The measuring ranges thus marked must only be used with clean and non-corrosive gases.
2) For measuring instruments with a max. measuring range of up to 2 bar, operation in the vacuum measuring range is
limited to -350 mbar. (The measuring ranges -1 ... +1 bar and -1 ... +2 bar are excluded.)
3) CPGLog data logger evaluation software is required in order to use the logger functionality.
12
1)
mbar 0 ... 70
mbar 350
mbar 3500
mbar 0.001
bar 0 ... 1 0 ... 2
bar 2 4
bar 35 35
bar 0.0001 0.0001
bar 0 ... 35 0 ... 70
bar 70 140
bar 140 700
bar 0.001 0.001
bar abs. 0 ... 1 0 ... 2
bar abs. 2 4
bar abs. 35 35
bar abs. 0.0001 0.0001
% / FS ± 0.05; (± 0.1 for 0 ... 70 mbar)
± 0.25; (measuring ranges up to max. 35 bar)
% / FS ± 0.1; (measuring ranges -1 ... +1 bar and -1 ... +2 bar)
Relative pressure, absolute pressure (up to 20 bar abs) and
vacuum measuring ranges)
¼" NPT male (incl. ¼" NPT female on G ½ male adapter)
All liquids and gases compatible with 316 stainless steel
Cyclic logger: automatic recording of up to 8500 values;
Cycle time: selectable from 1 ... 3600 sec. in the following steps
1 sec., 2 sec., 5 sec., 10 sec., 30 sec., 1 min., 2 min., 5 min., 10
min., 30 min. and 1 h
316 stainless steel
stainless steel
WIKA Operating Instructions Model CPG1000
1) 1)
-1 ... +1 -1 ... +2
2 4
35 35
0.0001 0.0001
0 ... 140 0 ... 200
210 420
700 700
0.01 0.01
0 ... 7 0 ... 20
14 42
70 140
0.0001 0.001
0 ... 7 0 ... 20
14 42
70 140
0.0001 0.001
0 ... 350 0 ... 700
700 1100
700 1100
0.01 0.01
2)
1)