Maintenance And Cleaning And Servicing - WIKA CPG1000 Betriebsanleitung

8. Maintenance, cleaning and servicing
8. Maintenance, cleaning and servicing
8.1 Maintenance
GB
This CPG1000 precision digital pressure gauge is maintenance-free.
Repairs must only be carried out by the manufacturer. Except for battery replacement.
8.2 Cleaning
8.3 Recalibration
DKD certificate - Certificates:
We recommend that the instrument is regularly recalibrated by the manufacturer, with time
intervals of approx. 12 months. Every factory recalibration includes, additionally, an exten-
sive free-of-charge check of all system parameters with respect to their compliance with
the specification. The basic settings will be corrected if necessary.
26
CAUTION!
Before cleaning, correctly disconnect the CPG1000 from the pressure
■
supply, switch it off and disconnect it from the mains.
Clean the CPG1000 with a moist cloth.
■
Electrical connections must not come into contact with moisture.
■
Wash or clean the dismounted CPG1000 before returning it, in order to
■
protect staff and the environment from exposure to residual media.
Residual media in dismounted precision digital pressure gauge can
■
result in a risk to persons, the environment and equipment. Take suffi-
cient precautionary measures.
For information on returning the precision digital pressure gauge see
chapter "10.2 Return".
WIKA Operating Instructions Model CPG1000