Name Of Each Part - Panasonic AV-HS04M7D Bedienungsanleitung

Name of each part

 Setting switches
<Setting switch table>
SW1
Switch No.
1
2 Reserved
3
4: OFF, 5: OFF Center
4
4: ON, 5: OFF Right
Screen position
4: OFF, 5: ON Left
5
4: ON, 5: ON Center
6: OFF, 7: OFF OFF
6
6: ON, 7: OFF 108 %
Gamut limiter
6: OFF, 7: ON 104 %
7
6: ON, 7: ON 100 %
8 Color matrix conversion Convert
Reserve:
Use in the OFF position (factory default).
Screen position setting:
Select between center, right and left for the screen position in EC (Edge Crop)
mode.
Gamut limiter setting:
Set whether to limit the incoming image signal to a 100 %, 104 % or 108 % level
(black at 0 %) in the RGB range or to not place a limit on it (OFF).
Color matrix conversion:
Set whether or not to perform color conversion on ITU-R BT.709 image signals to
convert them to ITU-R BT.601 image signals.
1 O
2 N
3
SW1
4
5
6
7
8
SW2
OFF ON Factory setting
— — OFF
— — OFF
— — OFF
OFF
OFF
OFF
OFF
Not converted
OFF
(through)
9 (E)
Name of each part
SW2
Switch No. OFF
1 Reserved —
2 Reserved —
3 Reserved —
4 Reserved —
5 Reserved —
6 Reserved —
7 Reserved —
8 Reserved —
Use switches No. 1 to 8 at the "OFF" (factory setting) position.
ON Factory setting
— OFF
— OFF
— OFF
— OFF
— OFF
— OFF
— OFF
— OFF
10 (E)