Operation (3D mode)
Turn [F5] to set the 3D output format for the 3DFrmt
item, and press the [F5] switch to enter the setting.
An asterisk () appears on the left of the currently
selected format.
L: The Lch image is output.
R: The Rch image is output.
SbyS (side by side):
The size of the Lch and Rch images is reduced by
50 % in the horizontal direction, and the images are
placed side by side and output to the monitor.
The Lch and Rch images can be checked at the
same time on a 2D monitor.
When SbyS has been selected, a 1H delay is
added to the output signals compared with when
other 3D output formats have been selected.
LbyL (line by line):
The Lch and Rch images are arranged alternatively
line by line, and output.
The following restrictions may apply depending on the output connectors and the option board which has been connected.
Output
Output
connector
signal
1 to 4
SDI
5
DVI-D
6
DVI-D
A1
Analog
A2
Analog
A1
Analog
A2
DVI-I
A1
SDI
A2
SDI
B1
SDI
B2
SDI
1:
When "LbyL" is selected for OUTPUT5 (DVI-D output), the OUTPUT6 output signal becomes the same as the
OUTPUT5 signal. (The Source, Movdet, 3DFrmt, Size and Scale settings are made the same.)
2:
When the down-converter has been selected for the SDI output, "LbyL" cannot be selected.
Option board
L
AV-HS04M4
AV-HS04M5
AV-HS04M7
AV-HS04M7D
LRMIXa (LR mix a):
The Lch and Rch images are mixed, and the mixed
images are output.
LRMIXb (LR mix b):
Magenta is mixed within the Lch LRMIXa image and
green is mixed within the Rch LRMIXa image, and the
images are output.
LRDiff (LR difference display):
The luminance components of the Lch and Rch
images are compared, and the difference between
them is displayed using a gray scale.
Using the Rch image as the reference, the parts of
the Lch image with a higher luminance are displayed
brightly while the parts of the same image with a
lower luminance are displayed dimly.
Parts where the luminance of the Lch and Rch
images is identical are displayed using 50 % gray.
LRChk (LR check display):
The Lch and Rch images are arranged in the form of
a grid, and output.
R
SbyS
LbyL
1
—
—
—
—
—
—
2
2
2
2
33 (E)
LRMIXa
LRMIXb
LRDiff
: Can be set.
—: Cannot be set.
LRChk