Operation (3D Mode) - Panasonic AV-HS04M7D Bedienungsanleitung

Operation (3D mode)

1:
To the crosspoint button where an odd-numbered input (Lch) has been assigned, the input of the even-numbered input
connector (Rch) in the same pair of connectors is also assigned.
Example:
If, when IN1 has been assigned to crosspoint 1, the crosspoint 1 button for the PGM bus is pressed and its light turned
on, the INPUT1 signal is selected for PGM bus Lch and the INPUT2 signal is selected for PGM bus Rch.
2:
The Lch and Rch signals are the same when one of the following signals has been assigned to a crosspoint button:
Black, CBGD, CBAR
3:
The operations performed differ depending on the frame memory settings.
[Frame memory settings]
 Press the [FMEM] button to light its indicator, and display the FMEM menu.
 Turn [F1] to display the Mode sub menu.
<Menu display>
1 | FMEM1,2 | FMEM3,4 |
FMEM
Mode |
Sepa
 Turn [F2] to select the frame memory (FMEM1 and FMEM2) images for the FMEM1,2 item.
LR: Set the FMEM1 image in Lch and the FMEM2 image in Rch.
 In the crosspoint button where FMEM1 has been assigned, the FMEM1 image is set for Lch and the
FMEM2 image is set for Rch.
 In the crosspoint button where FMEM2 has been assigned, the FMEM1 image is set for Lch and the
FMEM2 image is set for Rch as well.
Sepa: The FMEM1 and FMEM2 images are handled separately.
 In the crosspoint button where FMEM1 has been assigned, the FMEM1 image is set for both Lch and
Rch.
 In the crosspoint button where FMEM2 has been assigned, the FMEM2 image is set for both Lch and
Rch.
 Turn [F3] to select the frame memory (FMEM3 and FMEM4) images for the FMEM3,4 item.
LR: Set the FMEM3 image in Lch and the FMEM4 image in Rch.
 In the crosspoint button where FMEM3 has been assigned, the FMEM3 image is set for Lch and the
FMEM4 image is set for Rch.
 In the crosspoint button where FMEM4 has been assigned, the FMEM3 image is set for Lch and the
FMEM4 image is set for Rch as well.
Sepa: The FMEM3 and FMEM4 images are handled separately.
 In the crosspoint button where FMEM3 has been assigned, the FMEM3 image is set for both Lch and
Rch.
 In the crosspoint button where FMEM4 has been assigned, the FMEM4 image is set for both Lch and
Rch.
|
LR| LR| |
Sepa
30 (E)