Panasonic AV-HS04M7D Bedienungsanleitung Seite 29

Operation (3D mode)
 Press the [MV] button to light its indicator, and display
the MV menu.
 Refer to "2-1-5. LCD menu area" in the Operating
Instructions of the AV-HS450.
 Turn [F1] to display the 3D Moni sub menu.
<Menu display>
3 | PGM | PVW
MV
3D Moni | Off|
Lum
Red
Green
Blue
Prllx
Grid
 Turn [F2] to select the type of "3D status monitor" to be
superimposed onto the program image for the PGM
item.
When a setting other than "Off" is selected, the "3D
status monitor" is displayed on the program image
appearing on the multi view display.
 Turn [F3] to select the type of "3D status monitor" to
be superimposed onto the preview image for the PVW
item.
When a setting other than "Off" is selected, the "3D
status monitor" is displayed on the preview image
appearing on the multi view display.
Types of "3D status monitor"
Lum: The luminance component is turned into a
histogram with Lch and Rch superimposed,
and displayed.
Red: The red component is turned into a
histogram with Lch and Rch superimposed,
and displayed.
Green: The green component is turned into a
histogram with Lch and Rch superimposed,
and displayed.
Blue: The blue component is turned into a
histogram with Lch and Rch superimposed,
and displayed.
Prllx: The amount of parallax between Lch and
Rch is turned into a histogram, and displayed
at the top of the screen.
In addition, a bar which compensates for
deviation in the vertical direction of the input
signals (Lch and Rch) is displayed at the
right side of the screen.
Grid: A grid is displayed at intervals of about 3 %
along the width of the screen.
Off: The "3D status monitor" is not displayed.
| PVWOUT |
Off| Off|
Lum On
Red
Green
Blue
Prllx
Grid
 Turn [F4] to select On or Off for the PVWOUT item.
On: The "3D status monitor" is displayed in the
preview output.
Off: The "3D status monitor" is not displayed in the
preview output.
38 (E)