Panasonic AV-HS04M7D Bedienungsanleitung Seite 38

Setting menu table
Sub menu
Menu
Turn F1 to select.
FMEM FMEM 1
Mode
FMEM 2
AUX
FMEM 3
Memory
SDCard SDCard 1
File
SDCard 2
CardInfo
CTL CTL 1
RS422
CAM CAM 1
CamCTL1
CAM 2
CamCTL2
CAM 3
CamMenu
Parameter 1
Turn F2 to select.
Parameter FMEM1,2
Setting range LR, Sepa
Default value LR
Parameter FMEM
Setting range FMEM1 to 4
Default value FMEM1
Parameter Mode
Setting range AUTO, Manual
Default value AUTO
Mode ↓
Parameter
Load, Save, Init,
Setting range
Delete, No Card
Default value —
Parameter Images
Setting range
Default value
Parameter Edit-EN
Setting range Enable, Disable
Default value Enable
Parameter CTL
Setting range 1 to 5
Default value 1
Parameter CTL
Setting range 1 to 5
Default value 1
Parameter CTL
Setting range 1 to 5
Default value 1
47 (E)
Parameter 2 Parameter 3
Turn F3 to select. Turn F4 to select.
FMEM3,4
LR, Sepa
LR
Select Review
AUX1 to 4 On, Off
AUX1 Off
Select
FMEM1 to 4, ALL
ALL
Select SaveFile
FMEM1 to 4, Different fi lenames are used
SetUp depending on the setting selected
on the Mode sub menu of the FMEM
menu.
 When LR has been selected as the
FMEM1,2 item or FMEM3,4 item
setting:
HS001_L, HS001_R
 When Sepa has been selected as
the FMEM1,2 item or FMEM3,4 item
setting:
HS001
— —
FreeSpace
MB/ MB
COM-EN
Enable, Disable
Enable
Signal Tally
IN1 to IN15 (odd Enable, Disable
numbers), IN-A1,
None
None Disable
PosCont PTSpeed
PanTilt, Fast, Middle, Slow On, Off
Zm/Focs
PanTilt Fast
C-Menu ↓
Item
On, Off Cursor
On —
Parameter 4
Turn F5 to select.
Exec ↓
Exec ↓
Exec ↓
GetInf ↓
Protcol
P/TCont,
P/TDirt
P/TCont
Power ↓
On
Val/Y/N
Cursor
—