24Packet-Filter L2 If Enable; 25Packet-Filter L2 If Disable; Clear; Show - Belden HIRSCHMANN EAGLE40-07 Referenzhandbuch

3 1 .1 .2 4 pa c k e t -filt e r l2 if e na ble
Enables an interface of a L2 firewall rule.

Mode: Global Config Mode

Privilege Level: Operator

Format: packet-filter l2 if enable <P-1> <P-2> <P-3> <P-4>
Parameter Value
port
P-1
vlan
1..4042
P-2
ingress
P-3
egress
1..999
P-4
3 1 .1 .2 5 pa c k e t -filt e r l2 if disa ble
Disables an interface of a L2 firewall rule.

Mode: Global Config Mode

Privilege Level: Operator

Format: packet-filter l2 if disable <P-1> <P-2> <P-3> <P-4>
Parameter Value
port
P-1
vlan
1..4042
P-2
ingress
P-3
egress
1..999
P-4
3 1 .2 cle a r
Clear several items.

Mode: Privileged Exec Mode

Privilege Level: Operator

Format: clear
3 1 .3

show

Display device options and settings.
3 1 .3 .1 show pa c k e t -filt e r l3 globa l
Display the packet-filter global information and settings.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show packet-filter l3 global
3 1 .3 .2 show pa c k e t -filt e r l3 m a x rule s
Max. number of allowed rules in L3 rule table

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show packet-filter l3 maxrules
3 1 .3 .3 show pa c k e t -filt e r l3 de fa ult polic y
Default policy (accept(1), drop(2), reject(3))

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show packet-filter l3 defaultpolicy
124
Meaning
Interface type to use is physical interface.
Interface type to use is L2 VLAN.
Interface ID for rule assignment.
Rule applies on ingress direction.
Rule applies on egress direction.
Rule index
Meaning
Interface type to use is physical interface.
Interface type to use is L2 VLAN.
Interface ID for rule assignment.
Rule applies on ingress direction.
Rule applies on egress direction.
Rule index
RM CLI EAGLE40-07
Release 04.1.01 05/2021