Linktraps; Speed; Name; Power-State - Belden HIRSCHMANN EAGLE40-07 Referenzhandbuch

Parameter Value
mdi
P-1
mdix
auto-mdix
1 7 .5 link t ra ps
1 7 .5 .1 link t ra ps
Enable/disable link up/down traps on the interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: linktraps

no link t ra ps
Disable the option

Mode: Interface Range Mode

Privilege Level: Operator

Format: no linktraps
1 7 .6 spe e d
1 7 .6 .1 spe e d
Sets the speed and duplex setting for the interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: speed <P-1> [<P-2>]
Parameter Value
10
P-1
100
1000
full
P-2
half
1 7 .7 na m e
1 7 .7 .1 na m e
Set or remove a descriptive name for the interface.

Mode: Interface Range Mode

Privilege Level: Operator

Format: name <P-1>
Parameter Value
string
P-1
1 7 .8 pow e r-st at e
1 7 .8 .1 pow e r-st a t e
Enable or disable the power state on the interface. The interface power state settings have no effect if the interface
admin state is enabled.

Mode: Interface Range Mode

Privilege Level: Operator

Format: power-state
RM CLI EAGLE40-07
Release 04.1.01 05/2021
Meaning
The port does not use the crossover mode.
The port uses the crossover mode.
The port uses the auto crossover mode.
Meaning
10 MBit/s.
100 MBit/s.
1000 MBit/s.
full duplex.
half duplex.
Meaning
Enter a user-defined text, max. 64 characters.
69