11Dpi Opc Copyprofile; 12Dpi Opc Delprofile; 13Dpi Opc Enableprofile; 14Dpi Opc Disableprofile - Belden HIRSCHMANN EAGLE40-07 Referenzhandbuch

1 1 .1 .1 1 dpi opc c opyprofile
Copies a profile to another DPI OPC profile.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi opc copyprofile <P-1> <P-2>
Parameter Value
1..32
P-1
1..32
P-2
1 1 .1 .1 2 dpi opc de lprofile
Deletes a profile from the DPI OPC profile table. You cannot delete an active profile or if an enforcer mappings to it.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi opc delprofile <P-1>
Parameter Value
1..32
P-1
1 1 .1 .1 3 dpi opc e na ble profile
Enables a profile in the DPI OPC profile table. A profile can only be activated when all required parameters are
set. After activation modifications no longer possible.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi opc enableprofile <P-1>
Parameter Value
1..32
P-1
1 1 .1 .1 4 dpi opc disa ble profile
Disables a profile in the DPI OPC profile table. You cannot inactivate a profile if an active enforcer mappings to it.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi opc disableprofile <P-1>
Parameter Value
1..32
P-1
1 1 .1 .1 5 dpi ie c 1 0 4 c om m it
Writes all changes made in the DPI IEC104 profiles to the enforcer.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi iec104 commit
1 1 .1 .1 6 dpi ie c 1 0 4 a dd
Adds a profile to the DPI IEC104 profile table.

Mode: Global Config Mode

Privilege Level: Operator

Format: dpi iec104 add <P-1> [description <P-2>] [function-type <P-3>] [adv-type-
id-list <P-4>] [transmission-size <P-5>] [originator-addr-list <P-6>] [common-
addr-list <P-7>] [sanity-check <P-8>] [reset <P-9>] [debug <P-10>] [common-addr-
size <P-11>] [io-addr-size <P-12>] [allow-101 <P-13>]
[description]: Description/name for the DPI IEC104 profile.
[function-type]: Function type.
[adv-type-id-list]: Advanced type ID list.
[transmission-size]: Set cause of transmission size.
[originator-addr-list]: Originator address list (Configurable when cause of transmission size is 2).
[common-addr-list]: Common address list (For common address size 1, range is 0-255 and for common
address size 2, range is 0-65535).
[sanity-check]: Sanity check including format and specification.
[reset]: Reset connection message.
[debug]: Debug output in reset message.
[common-addr-size]: Set common address size.
[io-addr-size]: Set IO address size.
[allow-101]: Allow IEC101 type IDs.
Parameter Value
1..32
P-1
50
Meaning
Profile source index 1 - 32
Profile destination index 1 - 32
Meaning
Profile index 1 - 32
Meaning
Profile index 1 - 32
Meaning
Profile index 1 - 32
Meaning
Profile index 1 - 32
RM CLI EAGLE40-07
Release 04.1.01 05/2021