First Login (Pa Ssw Ord Cha Nge ) - Belden HIRSCHMANN EAGLE40-07 Referenzhandbuch

First login (Pa ssw ord cha nge )

To help prevent undesired access to the device, it is imperative that you change the default password during initial
setup.
Perform the following steps:
 Open the Graphical User Interface, the Command Line Interface, or HiView the first time you log on to the
device.
 Log on to the device with the default password.
The device prompts you to type in a new password.
 Type in your new password.
To help increase security, choose a password that contains at least 8 characters which includes upper-case
characters, lower-case characters, numerical digits, and special characters.
 The device prompts you to confirm your new password.
 Log on to the device again with your new password.
Note: If you lost your password, then use the System Monitor to reset the password.
For further information see:
RM CLI EAGLE40-07
Release 04.1.01 05/2021
hirschmann-support.belden.com.
19