Belden HIRSCHMANN EAGLE40-07 Referenzhandbuch Seite 565

[sourceport]: Specify the source L4 port.
[dest-ip]: Specify the destination IP address/mask.
[destport]: Specify the destination L4 port.
[ethertype]: Specify the Ethertype.
[proto]: Specify the protocol for L2 firewall rule.
[vlan]: Specify the VLAN ID for L2 firewall rule.
[description]: Rule description/name for L2 firewall rule.
[rate-limit]: Specify the rate limit and burst size.
[tos]: Specify TOS for L2 rule.
[log]: Set logging.
[trap]: Set sending SNMP traps.
Parameter Value
1..999
P-1
accept
P-2
drop
any
P-3
aa:bb:cc:dd:ee:ff
any
P-4
aa:bb:cc:dd:ee:ff
string
P-5
any
P-6
string
string
string
string
string
P-7
any
P-8
string
string
string
string
0x0600-0xfffft
P-9
appletalk
arp
ibmsna
ipv4
ipv6
ipx-old
mplsmcast
mplsucast
netbios
novell
pppoedisc
rarp
pppoesess
ipxnew
profinet
powerlink
ethercat
vlan8021q
icmp
P-10
igmp
ipip
tcp
udp
esp
ah
any
1..4042
P-11
string
P-12
0..10000000
P-13
0..128
P-14
pps
P-15
kbps
0..255
P-16
enable
P-17
disable
122
Meaning
Rule index
Accept packets.
Drop packets without notification.
Enter any as a shortcut for the MAC address 00:00:00:00:00:00.
Enter the MAC address in hexadecimal format.
Enter any as a shortcut for the MAC address 00:00:00:00:00:00.
Enter the MAC address in hexadecimal format.
Source IP address/CIDR mask/'any'
any Any port/portless protocol
a-b Port Range
a,b Port List (may be longer than two ports)
a-b,c-d List of Port Ranges (may be longer than two ranges)
1 to 65535 Port Number
Target IP address/CIDR mask/'any'
any Any port/portless protocol
a-b Port Range
a,b Port List (may be longer than two ports)
a-b,c-d List of Port Ranges (may be longer than two ranges)
1 to 65535 Port Number
value Ethertype
Appletalk
ARP
IBMSNA
IPv4
IPv6
IPX-OLD
MPLS Multicast
MPLS Unicast
NetBIOS
NOVELL
PPPOEDISC
RARP
PPPOESESS
IPXNEW
PROFINET
POWERLINK
ETHERCAT
IEEE802_1Q VLAN
Internet Control Message Protocol
Internet Group Management Protocol
IP-within-IP Encapsulation Protocol
Transmission Control Protocol
User Datagram Protocol
Encapsulating Security Protocol
Authentication Header
Any of the above
Enter a VLAN ID in the given range.
Rule description/name
Committed rate value, specified in kbps or pps.
Committed burst size value, specified in kbytes or pps.
Packets per second.
kbytes per second.
Specify the IP TOS bits to match.
Enable logging when applying the rule
Do not log applying the rule
RM CLI EAGLE40-07
Release 04.1.01 05/2021