Belden HIRSCHMANN EAGLE40-07 Referenzhandbuch Seite 445

The naming of copyrighted trademarks in this manual, even when not specially indicated, should not be taken to mean that these names may
be considered as free in the sense of the trademark and tradename protection law and hence that they may be freely used by anyone.
© 2020 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction, translation, conversion into any electronic
medium or machine scannable form is not permitted, either in whole or in part. An exception is the preparation of a backup copy of the software
for your own use.
The performance features described here are binding only if they have been expressly agreed when the contract was made. This document
was produced by Hirschmann Automation and Control GmbH according to the best of the company's knowledge. Hirschmann reserves the
right to change the contents of this document without prior notice. Hirschmann can give no guarantee in respect of the correctness or accuracy
of the information in this document.
Hirschmann can accept no responsibility for damages, resulting from the use of the network components or the associated operating software.
In addition, we refer to the conditions of use specified in the license contract.
You can get the latest version of this manual on the Internet at the Hirschmann product site (www.hirschmann.com).
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Rel. 04.1.01 - 05/2021 – 25.05.2021