Ip Ospf Cost; 10Ip Ospf Mtu-Ignore; 11Ip Ospf Authentication Type; Show - Belden HIRSCHMANN EAGLE40-07 Referenzhandbuch
Grafische benutzeroberfläche; anwender-handbuch konfiguration
Vorschau ausblenden
Andere Handbücher für HIRSCHMANN EAGLE40-07:
- Referenzhandbuch (901 Seiten) ,
- Anwenderhandbuch (54 Seiten) ,
- Referenzhandbuch (777 Seiten)
Werbung
2 1 .2 .9
ip ospf c ost
Configure the OSPF cost for the interface. The cost of a specific interface indicates the overhead required to send
packets across the link. If set to 0, OSPF calculates the cost from the reference bandwidth and the interface speed.
Mode: Interface Range Mode
Privilege Level: Operator
Format: ip ospf cost <P-1>
Parameter Value
1-
P-1
4294967_hmcliListO
SPFcost
2 1 .2 .1 0 ip ospf m t u-ignore
Enable/Disable OSPF MTU mismatch on interface.
Mode: Interface Range Mode
Privilege Level: Operator
Format: ip ospf mtu-ignore
no ip ospf m t u-ignore
Disable the option
Mode: Interface Range Mode
Privilege Level: Operator
Format: no ip ospf mtu-ignore
2 1 .2 .1 1 ip ospf a ut he nt ic a t ion t ype
Configure authentication type.
Mode: Interface Range Mode
Privilege Level: Operator
Format: ip ospf authentication type <P-1>
Parameter Value
none
P-1
simple
md5
2 1 .2 .1 2 ip ospf a ut he nt ic a t ion k e y
Configure authentication key.
Mode: Interface Range Mode
Privilege Level: Operator
Format: ip ospf authentication key <P-1>
Parameter Value
string
P-1
2 1 .2 .1 3 ip ospf a ut he nt ic a t ion k e y-id
Configure authentication key-id for md5 authentication.
Mode: Interface Range Mode
Privilege Level: Operator
Format: ip ospf authentication key-id <P-1>
Parameter Value
0..255
P-1
2 1 .3
show
Display device options and settings.
2 1 .3 .1
show ip ospf globa l
Display the OSPF global configurations.
Mode: Command is in all modes available.
Privilege Level: Guest
Format: show ip ospf global
82
Meaning
Auto cost for OSPF calculation
Meaning
Configure the authentication type as none (Key and key ID is not required).
Configure the authentication type as simple (Key ID is not required).
Configure the authentication type as md5 for the interface.
Meaning
<key> Configure the authentication key.
Meaning
Enter a number in the given range.
RM CLI EAGLE40-07
Release 04.1.01 05/2021
Werbung
Kapitel
