Show Lldp Global; Show Lldp Port; Show Lldp Remote-Data; Lldp - Belden HIRSCHMANN EAGLE40-07 Referenzhandbuch
Grafische benutzeroberfläche; anwender-handbuch konfiguration
Vorschau ausblenden
Andere Handbücher für HIRSCHMANN EAGLE40-07:
- Referenzhandbuch (901 Seiten) ,
- Anwenderhandbuch (54 Seiten) ,
- Referenzhandbuch (803 Seiten)
Werbung
2 6 .2 .1
show lldp globa l
Display the LLDP global configurations.
Mode: Command is in all modes available.
Privilege Level: Guest
Format: show lldp global
2 6 .2 .2
show lldp port
Display the port specific LLDP configurations.
Mode: Command is in all modes available.
Privilege Level: Guest
Format: show lldp port [<P-1>]
Parameter Value
slot no./port no.
P-1
2 6 .2 .3
show lldp re m ot e -da t a
Remote information collected with LLDP.
Mode: Command is in all modes available.
Privilege Level: Guest
Format: show lldp remote-data [<P-1>]
Parameter Value
slot no./port no.
P-1
2 6 .3
lldp
Configure of Link Layer Discovery Protocol on a port.
2 6 .3 .1
lldp a dm in-st a t e
Configure how the interface processes LLDP frames.
Mode: Interface Range Mode
Privilege Level: Operator
Format: lldp admin-state <P-1>
Parameter Value
tx-only
P-1
rx-only
tx-and-rx
disable
2 6 .3 .2
lldp fdb-m ode
Configure the LLDP FDB mode for this interface.
Mode: Interface Range Mode
Privilege Level: Operator
Format: lldp fdb-mode <P-1>
Parameter Value
lldp-only
P-1
mac-only
both
auto-detect
2 6 .3 .3
lldp m a x -ne ighbors
Enter the LLDP max neighbors for interface.
Mode: Interface Range Mode
Privilege Level: Operator
Format: lldp max-neighbors <P-1>
Parameter Value
1..50
P-1
RM CLI EAGLE40-07
Release 04.1.01 05/2021
Meaning
Meaning
Meaning
Interface will only transmit LLDP frames. Received frames are not processed.
Interface will only receive LLDP frames. Frames are not transmitted.
Interface will transmit and receive LLDP frames. This is the default setting.
Interface will neither transmit nor process received LLDP frames.
Meaning
Collected remote data will be based on received LLDP frames only.
Collected remote data will be based on the switch's FDB entries only.
Collected remote data will be based on received LLDP frames as well as on the
switch's FDB entries.
As long as no LLDP frames are received, the collected remote data will be based
on the switch's FDB entries only. After the first LLDP frame is received, the
remote data will be based on received LLDP frames only. This is the default
setting.
Meaning
Enter a number in the given range.
95
Werbung
Kapitel
