HBM S2M Serie Montageanleitung Seite 9

Symbol
WARNING
CAUTION
Notice
Important
Tip
S2M
operators should plan, implement and respond to the
safety engineering considerations of force measurement
technology in such a way as to minimize residual
dangers. On‐site regulations must be complied with at all
times.
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
Significance
This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in death or serious physical
injury.
This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in slight or moderate physical
injury.
This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
This marking draws your attention to important
information about the product or about handling the
product.
This marking indicates application tips or other
information that is useful to you.
Conversions and modifications
The transducer must not be modified from the design or
safety engineering point of view except with our express
agreement. Any modification shall exclude all liability on
our part for any damage resulting therefrom.
A3592-1.3 HBM: public
Safety instructions
7