HBM S2M Serie Montageanleitung Seite 20

Mechanical installation
Rigid force
transfer
correct
18
Fig. 6.1 Transducer orientation during installation
Important
The cable fastening side of the transducer should always
be connected directly with the rigid customer‐side force
transfer areas. Ensure that the cable is laid so that,
where possible, no force shunt is caused by the cable
(e.g. through the weight or stiffness of the cable), see
Fig. 6.1.
A3592-1.3 HBM: public
Rigid force transfer
incorrect
S2M