HBM S2M Serie Montageanleitung Seite 19

Mechanical installation
must not absorb any forces in the measuring direction of
the transducer. Screws, knuckle eyes and other cus­
tomer‐side construction elements must be screwed into
the S2M in such a way that the construction element
does not touch the measuring body (potting material)
even at full displacement.
Notice
Do not loosen the hexagon socket screws (Allen screws)
that connect the force applications and the overload stop
with the measuring body, as otherwise the force trans­
ducer calibration could become invalid.
S2M 17
A3592-1.3 HBM: public