Enraf Nonius Radarmed 950+ Gebrauchsanweisung Seite 49


Move the cursor one position to the right by means of the
"Display parameter selectors" [4]. Now the number will
flash.

Select by means of the "Central control" [8] the desired
program number. The parameter settings and advise
information are displayed.

Operate the "Accept key" [7].

Set the power.
Treatment starts as soon as the power is adjusted.
Operation preselection menu
Through the preselection menu you have the possibility to:

adjust the contrast of the LCD display

set the language

Switch off the unit incase it was turned on.

Press the "Program key protocols" [3] while the unit is
turned on. A sound signal is audible and the display shows
the fist option.

Select by means of the "Display parameter selectors" [4]
between "LCD contrast" or "Language". Adjust the settings
by means of the "Central control" [8].

Operate the "Accept key" [7] to confirm the alteration or
"Return key" [6] to cancel the alteration.

Switch off the unit and back on again. The unit is ready for
operation after finishing the self test.
081-400-095-4A_950+_EN
ENGLISH
Page 20 of 26