Enraf Nonius Radarmed 950+ Gebrauchsanweisung Seite 48

2. To retrieve by number: The retrieval by number is a fast way to retrieve a protocol from the memory
if
the number is known by the user.
To retrieve by name

Operate "Program key protocols" [3]. The display shows the
first cluster.

Select by means of the "Central control" [8] the desired
cluster.

Operate the "Accept key" [7]. The second line of the display
indicates the first indication of this cluster.

Select by means of the "Central control" [8] the desired
indication.

Operate the "Accept key" [7], the unit settings and advise
information appears on the display. The program number is
displayed in the upper right corner [12].

Set the power.
Treatment starts as soon as the power is adjusted.
To retrieve by number

Operate "Program key protocols" [3]. The display shows the
first cluster.

Operate "Program key protocols" [3] once again. In the
upper right corner appears a flashing letter with besides it a
number (e.g. A1). The parameter settings concerning that
program aredisplayed on the display.

Select by means of the "Central control" [8] the desired
cluster (A till E).
081-400-095-4A_950+_EN
ENGLISH
Page 19 of 26