Checchi & Magli DUAL 12 GOLD Bedienungs- Und Wartungsanleitung Seite 90

Replacing the ploughshare
Proceed as outlined below.
1) Remove the circlip (A).
2) Unscrew the wing nut (B).
3) Lift and hold the clamping device (D).
4) Push the ploughshare forwards and
turn it so it is facing downwards.
5) Hold the ploughshare and remove
the screw (C) and washer (E).
For the assembly, carry out the same op-
erations as for disassembly but proceed-
ing in reverse order.
NOTICE
During assembly, fit the Plant Control
device inside the ploughshare.
Make sure the flexible plate is centred
with respect to the share (see "Symme-
trical adjustment of the flexible plate
with the ploughshare").
Scrapping the work vehicle
Scrapping operations must be handled by specialised
personnel with suitable skills for the job.
English language
INFORMATION CONCERNING REPLACEMENTS
UN41-0567BN
The components removed must be sorted according to
the type of materials they contain and in compliance
with the laws in force concerning "waste collection, sort-
ing and disposal".
42
D
E
C
Use and maintenance
8
A
B