Checchi & Magli DUAL 12 GOLD Bedienungs- Und Wartungsanleitung Seite 65

Planting depth adjustment
Proceed as outlined below.
1) Use the lock (A) to release the knob.
2) Turn the knob (B) to increase or decrease the depth
of the furrow.
3) After adjustment secure the knob (B) with the lock
(A).
Carry out the same operations to adjust the furrow depth
of the other units installed.
Adjusting the load and position of the float wheels
The float wheels are used to compact the soil in front of
the seedling and keep the planting unit level with the
ground.
To adjust the wheels load proceed as outlined below.
1) Turn the knob (A) clockwise or anticlockwise to in-
crease or decrease the load of the wheels (B) on the
ground.
Carry out the same operations to adjust the load of the
wheels of the other planting units installed.
To adjust the position of the wheels compared to the
ploughshare proceed as outlined below.
1) Loosen the nuts (A).
2) Slide the wheel (B) along the support into the posi-
tion required by the dual row.
3) Tighten the nuts (A).
Repeat the same procedure to adjust the position of the
other wheel.
NOTICE
The position should correspond with the planting
unit frame shift (see "Adjusting the dual row").
English language
ADJUSTMENT INFORMATION
A
UN41-0208DH
UN41-0209DH
UN41-0547BN
17
B
A
B
A
B
Use and maintenance
5