•
Work with low and even pressure and
even forward pressure. This protects
the appliance and the sanding sheet.
•
Grind rough corners and edges with
the top or side edge of the sanding
sheet.
•
Do not use the same sanding sheet to
sand different materials (e.g. metal
and then wood).
•
Empty the dust collection box or the
vacuum cleaner regularly in order to
ensure optimal suction.
Selection of sanding sheet
When using sanding sheets without
ventilation holes, dust extraction is
not possible.
Grain size P
Application
for pre-sanding rough
P 60
wood surfaces
P 80
for plain sanding
P 120
for fine sanding of primed
P 240
and painted surfaces
Choosing the right sanding
disc
Orbital sander disc:
•
For sanding/grinding large surfaces
as well as corners, edges and outer
curves.
Triangular sanding plate:
•
For processing surface areas, edges,
corners and hard to reach places.
Eccentric grinder disc:
•
For fine grinding of surfaces and pro-
cessing of inner curves.
Cleaning/Maintenance
Pull the mains plug before any ad-
justments, maintenance or repair.
Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
•
Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
•
Clean the sanding sheet with a vacu-
um cleaner or knock it out.
Cleaning/replacing the filter
insert of the dust collection
box
Check the filter insert once or twice a year
for contamination.
Removing the filter insert:
1. Pull the tab (9) and remove the
dust collection box lid (8) (see
"Connecting/removing/empty-
ing the dust collection box").
GB
IE
29