Sanding; Selection Of Sanding Sheet; Cleaning/Maintenance; Cleaning & Maintenance - Parkside PHS 160 D4 Originalbetriebsanleitung

G B
Pull the mains plug before any ad-
justments, maintenance or repair.
Danger of electric shock.
Do not use the tool without
the dust box fitted or external
dust extraction.

Sanding

• Move the appliance against the work-
piece once it is switched on.
• After machining, lift the sanding disc
up before turning off the device.
• Always lead the mains cable towards
the back and away from the device.
• Clean the sanding plate before you at-
tach a sanding sheet.
• Only work with sanding sheets in per-
fect condition to achieve good sanding
results.
• Work with low and even pressure and
even forward pressure. This protects
the appliance and the sanding sheet.
• Grind rough corners and edges with the
top or side edge of the sanding sheet.
• Do not use the same sanding sheet to
sand different materials (e.g. metal
and then wood).
• Empty the dust collection box or the
vacuum cleaner regularly in order to
ensure optimal suction.

Selection of sanding sheet

Grain size Application
P 60 for pre-sanding rough wood
P 80 surfaces
P 120
for plain sanding
P 180
for fine sanding of primed and
P 240
painted surfaces
4 0

Cleaning/Maintenance

Pull the mains plug before any ad-
justments, maintenance or repair.
Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
The following cleaning and servicing
should be done regularly. This will ensure a
long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably damage
the appliance.
• Clean the sanding sheet with a vacuum
cleaner or knock it out.
Cleaning / replacing the
filter insert of the dust
collection box
Check the filter insert once or twice a year
for contamination.
Removing the filter insert:
1. Press the release button (
and pull the dust collection box
( 8) out. (see "Connecting/
removing/emptying the dust col-
lection box")
4)