flamco MeiTronic W10B Bedienungsanleitung Seite 15

DESCRIPTION OF SYMBOLS
PRESENTED ON THE DISPLAY
Symbol
Protection again room freezing.
Frost protection - boliler switch-on to minimum temperature.
SYMBOLS FOR THE INDICATION OF COMMUNICATION
BETWEEN DEVICES CONNECTED
Symbol
Devices connected to communication port COM.
Room unit is connected. The number beside room unit indicates,
whether this is the first or the second room unit.
Controller and communication port COM/BUS status.
Single controller - not in BUS network.
The first (master) controller in BUS network.
Intermediate (slave) controller in BUS network.
The last (slave) controller in BUS network.
SYMBOLS FOR MESSAGES AND ERRORS
Symbol
Message
In the event of exceeding the maximum temperature or when
a protection function is switched on, the controller will cause
an appropriate symbol on the display to flash. When maximum
temperature is no longer exceeded or when a protection
function has switched off, a turned on symbol will note the
recent event. By pressing the
screen is retreived.
Error
In the event of sensor malfunction, BUS network error or COM
connection error, the controller will cause an appropriate symbol
on the display to flash. When the error is remedied or is no
longer present, a turned on symbol will note the recent event. By
pressing the
User Manual
Description
Description
Description
button, the message review
button, the message review screen is retreived.
EN
15