Assembly - SPORTSTECH LCX800 Benutzerhandbuch

FIRMLY TIGHTEN ALL COMPONENT PARTS AND PRE-ASSEMBLED PARTS!
Step 1
1. Fix front stabilizer (11) with inner hex pan head bolt (15), spring washer (22),washer (26) to the mainframe (1)
2. Fix rear stabilizer (12) with inner hex pan head bolt (15), spring washer (22),washer (26) to the mainframe (1)
3. press the rubber ring (78) onto the mainframe (1).
Step 2
1. Connect sensor wire (61) and trunk wire (62).
2. Fasten the handlebar post (3) to the mainframe (1) with inner hex pan head bolt (18) spring washer (23), curve
washer (29) for the side holes. Fix the handlebar post (3) to the mainframe (1) with inner hex pan head bolt (18), spring
washer (23), and washer (28) for the front holes.

ASSEMBLY

45
EN