Herunterladen Diese Seite drucken

Adjusting The Support Leg; Engaging Of The Aton; Reglage De La Jambe De Force - CYBEX ATON BASE-FIX Kurzanleitung

Ece r44/04 gr. 0+ - ca.18m -13kg/–28lbs

Werbung

AJUSTING THE SUPPORT LEG
Push the adjustment button (y) and pull out the support leg (u)
until it rests firmly on the floor of the vehicle.
Warning! the support leg must always have direct contact to the
floor. no objects may be placed under the support leg.
Note! Ensure that the support leg does not raise the ATON BASE-
fix from the surface of the vehicle seat.
Warning! In case your car features a storage tray in the leg
room, please contact the vehicle manufacturer.

ENGAGING OF THE ATON

Note! ensure that the top of the aTOn base-fix is free of foreign
objects.
referring to the user guide please ensure that the carrying
handle (a) is in the upper position A and the child is secured with
the integrated harness system. Please refer to the user guide of
the ATON for adjusting the carrying handle.
– Place the aTOn infant carrier reverse to the driving position
above the aTOn base-fix.
– move the aTOn down along the backrest and connect the
locking bar (r) at the head end with the locking bar retainer
(i).

REGLAGE DE LA JAMBE DE FORCE

Poussez le bouton de règlage (y) et tirez la jambe de force
(u) jusqu'à ce qu'elle repose fermement sur le plancher du
véhicule.
avertissement! la jambe de force doit toujours être en contact
direct avec le plancher. il ne doit pas y avoir d'objets sous la
jambe de force.
Note! Assurez vous que la jambe de force ne soulève pas la
base-fix aTOn du siège.
avertissement! Si vous avez un tiroir de rangement dans le
plancher de votre voiture, veuillez contacter le fabricant du
véhicule.
FIXER L'ATON
Note! Assurez vous qu'il n'y a pas d'objets étrangers sur la
surface de la base-fix aTOn.
consultez le manuel aTOn pour vérifier que la poignée (a) est
dans la position haute A et que l'enfant est bien attaché avec
le harnais intégré. Se référer au manuel de la coque ATON pour
ajuster la poignée (a).
– Positionnez la coque aton, position dos à la route, au dessus
de la base-fix aTOn.
– abaissez la coque aTOn le long du dossier du siège passager
et connectez la barre de verrouillage (r) côté tête avec le
loquet de barre (i).
21

Werbung

loading